The IX-MV is an IP addressable video master station with a 3.5” color LCD monitor. It can be wall or desk mounted (desk stand included). The IX-MV offers handset (duplex) and hands-free (VOX/PTT) communication and can page up to 5 zones simultaneously. The station is equipped with a door release button to unlock doors remotely.
IX-MV Master Station 500 stations IX-DA, IX-DF, IX-DF-HID-I*1, IX-DF-HID*1, IX-DF-2RA*1, IX-DF-PI* 2, IX-DF-P* Video Door Station 20 stations*3 IX-BA, IX-SS, IX-SS-2RA*1 Audio Only Door Station 20 stations*3 *1 North America only. *2 Except North America. HID Card Reader is not included. *3 Only Master Stations can be registered (Max. 20).
Connect the option connector (included), the low-voltage lines, and Cat-5e/6 cable to the unit, and position them as shown. 80mm (3-1/8”) or less Use a covering duct for Cat- 5e/6 cable and low-voltage lines, and leave a space (exposed portion) of no more than.
If you do not have the ID and Password, click here for a document that will show you how to initialize IX Series stations and adaptors. Once initialized, their ID and Password will be defaulted to admin/admin (all lowercase). This will allow you to upgrade the firmware and program the stations. Firmware.
Page 235System Settings (Settings (Station View)) 4) When done, click 5) Click Point When using the file for a ringback tone, a ringtone, or a network camera event tone, set up the silent time for the source. To delete a registered audio file, check the file and click . Page 236: Contact / Audio Output Settings.
IX-MV – Aiphone, IX-MV – Aiphone, IX Series Frequently Asked Questions and Troubleshooting, IX Series Frequently Asked Questions and Troubleshooting, Summary of Contents for Aiphone Master Station IX-MV. Page 1: Master Station. IX System Master Station (IX-MV) Operation Manual Software version 2.00 or later R ead this “Operation Manual” prior to usage to ensure safe and correct operation. K eep this in.
The adaptor can also be restored to factory defaults, the firmware can be updated, or can be rebooted from the maintenance screen. Step 9: Adding the IX-1AS to the IX-MV Now that the IX-1AS has been programmed, the IX-MV master(s) address book will need to.
The IX-PA adaptor is defaulted to DHCP. When it powers on with factory default settings, it will request a DHCP address. If it does not receive one, it will wait for any computer using ARP to locate X.X.X.168 and respond, and then use that address until it is rebooted or a static IP address is assigned.
1/4/2016 · Jan 4, 2016. #1. From the console if I choose 8) Reset to factory defaults and reboot, I expect the system to go back to how I got it from the factory . This does not occur. Plenty of settings remain, such as the hostname, Samba settings, ZFS Pool info, etc. Is there a true way to factory .
-12 dB ( Default setting) 1=ON, 2=ON -14 dB 1=ON, 2=OFF * Factory presetting LAN PoE PSE Port (Out) LAN PoE PD Port (In) LAN PoE PSE Port (Out) LAN PoE PD Port (In) LAN PoE PSE Port (Out) LAN PoE PD Port (In)
